Product detail
DISCONTINUED PRODUCT
Description:
The three-phase (MULTI VOLTAGE) inverter power source for TIG welding with high frequency and MMA-SMAW, TIG 4080 DC HF, is equipped with high frequency start, pulsed arc mode and is suitable for welding of iron, steel, stainless steel, copper and titanium.
In TIG mode it provides a current of 350 A with 35% duty cycle (EN60974-1).
It can weld coated rutile and basic electrodes.
It is suitable for medium metal fabrication as well as for servicing in general.
MAIN FEATURES:
• Pulsed Arc function to reduce thermal alteration and simplify welding of thin coils.
• Two/Four time and spot welding function.
• 4-time bi-level, 4-time tri-level and 4-time with SWP programme.
• Preset for use with remote control: pedal, manual or up-down control on the torch.
• In TIG welding the arc may be started either with high voltage – high frequency (HF Start) or by contact (Contact Start).
• Storage up to 9 welding programs in memory which may be easily re-called.
• Microprocessor control of the welding functions.
• Predisposition to use water cooled torches.
• Adjustable Pre-Gas and Post-Gas.
• Adjustable Arc-Force and Hot-Start in MMA.
• Digital display instruments to control welding current and tension.
ADVANTAGES
• Automatic setting of appropriate voltage within the following ranges: 3x208/220/230V and 3x400/440V
• Minimized thermal alteration for welding of thin coils.
• Great arc stability.
• Control panel with easy-to-operate controls.
• Possibility of adjusting current directly on the torch UP-DOWN.
• Forced air cooling through cooling tunnel.
• IP23 protection class to allow outdoor work.
• High efficiency and low absorption from mains.
• Possibility to be connected to motor-driven generators.
• Compact design and low weight.
Technical data:
|
Code
|
S00120
|
|
Item
|
TIG 4080 DC HF
|
|
Mode
|
TIG
|
MMA
|
|
Input Voltage
|
3x208/220/230V 50-60 Hz
|
3x400/440 50-60Hz
|
3x208/220/230V 50-60 Hz
|
3x400/440 50-60Hz
|
|
Absorbed power
|
35% 7,8 kVA - 60% 6,8 kVA - 100% 6,1 kVA
|
35% 10,5 kVA - 60% 8,4 kVA - 100% 7,5 kVA
|
35% 9,3 kVA - 60% 7,8 kVA - 100% 7 kVA
|
40% 11,5 kVA - 60% 9,8 kVA - 100% 8,6 kVA
|
|
MIN-MAX Welding current
|
5 ÷ 280 A
|
5 ÷ 350 A
|
10 ÷ 240 A
|
10 ÷ 280 A
|
|
Duty cycle – 10 MIN CYCLE ACCORDING TO EN 60974-1
|
35% 280A - 60% 245A - 100% 220A
|
35% 350A - 60% 280A - 100% 250A
|
35% 240A - 60% 200A - 100% 180A
|
40% 280A - 60% 240A - 100% 210A
|
|
Electrodes
|
-
|
Ø mm 1,6 ÷ 6
|
|
Stepless regulation
|
ELECTRONIC
|
|
Protection class
|
IP 23
|
|
Insulation class
|
H
|
|
Construction standards
|
EN60974-1 / EN60974-10
|
|
Dimensions
|
330x420x560h mm
|
|
Weight
|
31 kg
|
Accessories:
| 535802 |
4 m, ABITIG 26 torch4 m, ABITIG 26 torch |
(Optional) |
 |
| 535805 |
4 m, ABITIG 26 UP-DOWN torch4 m, ABITIG 26 UP-DOWN torch |
(Optional) |
 |
| 535806 |
4 m, ABITIG 18 water cooled torch4 m, ABITIG 18 water cooled torch |
(Optional) |
 |
| 535807 |
4 m, ABITIG 18 UP-DOWN water cooled torch4 m, ABITIG 18 UP-DOWN water cooled torch |
(Optional) |
 |
| 530138 |
Earth cable for weldingEarth cable for welding |
(Optional) |
 |
| S01704A.10 |
Accessories kit for electrode welding with 5+3,5 m cables of 35 mm2 and "texas" connection 50Accessories kit for electrode welding with 5+3,5 m cables of 35 mm2 and "texas" connection 50 |
(Optional) |
 |
| 560102 |
CU56H - Horizontal 5 l cooling unit for torchCU56H - Horizontal 5 l cooling unit for torch |
(Optional) |
 |
| 580007 |
Transport cartTransport cart |
(Optional) |
 |
| 540102 |
INOX FAST CLEAN KITINOX FAST CLEAN KIT |
(Optional) |
 |
| 570006 |
Remote controlRemote control |
(Optional) |
 |
| 530330 |
5 m long cable for remote control5 m long cable for remote control |
(Optional) |
 |
| 570008 |
TIG foot controlTIG foot control |
(Optional) |
 |
| 363307 |
Foot control and TIG torch connectorFoot control and TIG torch connector |
(Optional) |
 |
| 357502 |
Flowmeter with 2 gas pressure gaugesFlowmeter with 2 gas pressure gauges |
(Optional) |
 |
| 309269 |
Helmet with auto-dimming LCD filter (9-13 DIN) MAXIVISION COLOR to protect face and eyes during welding.Helmet with auto-dimming LCD filter (9-13 DIN) MAXIVISION COLOR to protect face and eyes during welding. |
(Optional) |
 |
Documents: