detalle del producto
DESCONTINUADO
descripción:
Single-phase power source with inverter technology for compressed air metal plasma cutting.
It's characterised by compact design, low weight, easy handling, user-friendliness, possibility to be connected to home mains (3kW) and cutting high-efficiency on small and medium thicknesses.
It can be fed from motor-driven generators with an electronic regulator of the tension, a power equal to or greater than 3,5 kVA and not delivering a voltage greater than 260V RMS.
A minimum cutting current of 5A allows cutting operations on superimposed thin sheets, particularly useful in car body works.
It's equipped with PFC (Power Factor Correction) device to reduce and stabilize the energy absorption.
It's suitable for on-site jobs, even where single-phase input only is available and for small-scale productions.
Configuration at delivery includes: 4 metre P35 torch and earth cable.
MAINS FEATURES
- Pilot arc, to cut painted and coated metals.
- High-frequency starting,
- “Post-gas” function,
- Self Restart Pilot function for nets and grids cutting,
- Mains over-voltage protection,
- Safety systems on the torch,
- Compressed air flow control,
- Microprocessor-controlled cutting parameters and functions,
- Thermostatic protection,
- Electronic regulation of cutting current,
- PFC device,
- High efficiency and low absorption from mains.
datos técnicos:
|
Code
|
P00487
|
|
|
Item
|
PLASMA 36 INVERTER
|
|
|
Input Voltage
|
1x230V 50-60Hz
|
|
|
Absorbed power
|
45% 3,5kVA - 60% 3,3 kVA - 100% 2,8 kVA
|
|
|
Cutting current
|
5 ÷ 30 A
|
|
|
Duty cycle – 10 MIN CYCLE ACCORDING TO EN 60974-1
|
45% 30A - 60% 28A - 100% 25A
|
|
|
Air pressure
|
3,5 bar
|
|
|
Air flow
|
60 l/min
|
|
|
Cut thickness on steel
|
7 - 10 mm
|
|
|
Max separation cut
|
12 mm
|
|
|
Protection class
|
IP23
|
|
|
Construction standards
|
EN 60974 – 1 / EN 60974 – 7 / EN 60974 – 10
|
|
|
Dimensions
|
180x400x410h mm
|
|
|
Weight
|
13 kg
|
|
Video
PLASMA 36 INVERTER
accessorios:
documentos: