detalle del producto
DESCONTINUADO
descripción:
Tri-phase power source for plasma cutting suitable for any cutting requirement on any kind of metal.
It features excellent cutting speed and performace. It can cut up to 12 mm on steel and separate up to 15 mm and it is suitable for light-medium metal fabrication as well as servicing in general.
The cutting current is not affected by mains voltage variations, change in the distance between the torch and the piece you are cutting or the speed at which you move forward.
Configuration at delivery including 6 m P50 torch and earth cable.
MAIN FEATURES
- Pilot arc
- High-frequency starting
- Electric protection system on the torch
- Compressed air flow control
- Thermal protection by thermostat
- Copper windings
Different voltages available on request
datos técnicos:
|
Code
|
P00488
|
|
|
Item
|
PLASMA 55
|
|
|
Input Voltage
|
3x230/400V 50Hz
|
|
|
Absorbed power
|
35% 12,5kVA - 100% 8,5kVA
|
|
|
Cutting current
|
30 - 50 A
|
|
|
Duty cycle – 10 MIN CYCLE ACCORDING TO EN 60974-1
|
35% 50A - 100% 30A
|
|
|
Air pressure
|
4,7 ÷ 4,8 bar
|
|
|
Air flow
|
120 l/min
|
|
|
Cut thickness on steel
|
12 mm
|
|
|
Max separation cut
|
15 mm
|
|
|
Protection class
|
IP21
|
|
|
Construction standards
|
EN 60974 – 1 / EN50199
|
|
|
Dimensions
|
410x520x780h mm
|
|
|
Weight
|
65 kg
|
|
accessorios:
documentos: