detalle del producto
DESCONTINUADO
descripción:
Tri-phase power source for plasma cutting suitable for any cutting requirement on any kind of metal.
It features excellent cutting speed and performace. It can cut up to 25 mm on steel and separate up to 30 mm and it is suitable for light-medium metal fabrication as well as servicing in general.
The cutting current is not affected by mains voltage variations, change in the distance between the torch and the piece you are cutting or the speed at which you move forward.
Configuration at delivery including 6 m P150 torch and earth cable.
MAIN FEATURES
- Pilot arc
- High-frequency starting
- Electric protection system on the torch
- Compressed air flow control
- Thermal protection by thermostat
- Copper windings
Different voltages available on request
datos técnicos:
|
Code
|
P00492
|
|
|
Item
|
PLASMA 95
|
|
|
Input Voltage
|
3x400V 50Hz
|
|
|
Absorbed power
|
40% 18,4kVA - 90% 12,5kVA
|
|
|
Cutting current
|
60 - 90 A
|
|
|
Duty cycle – 10 MIN CYCLE ACCORDING TO EN 60974-1
|
40% 90A - 90% 60A
|
|
|
Air pressure
|
5 bar
|
|
|
Air flow
|
180 l/min
|
|
|
Cut thickness on steel
|
25 mm
|
|
|
Max separation cut
|
30 mm
|
|
|
Protection class
|
IP21
|
|
|
Construction standards
|
EN 60974 – 1 / EN50199
|
|
|
Dimensions
|
460x720x980h mm
|
|
|
Weight
|
115 kg
|
|
accessorios:
| 535487 |
6 m, P 150 hand torch, central adaptor6 m, P 150 hand torch, central adaptor |
(Standard) |
 |
| 535494 |
12 m, P 150 hand torch, central adaptor12 m, P 150 hand torch, central adaptor |
(Optional) |
|
| 535486 |
6 m, P 150 machine torch, central adaptor6 m, P 150 machine torch, central adaptor |
(Optional) |
 |
| 535496 |
12 m, P 150 machine torch, central adaptor12 m, P 150 machine torch, central adaptor |
(Optional) |
|
| 356502 |
Wheeled torch holder for P150Wheeled torch holder for P150 |
(Optional) |
 |
| 309488 |
Wheeled compasses for P150Wheeled compasses for P150 |
(Optional) |
 |
documentos: