Product detail
Description:
MULTI-VOLTAGE THREE-PHASE DC POWER SOURCE WITH INVERTER TECHNOLOGY FOR PLASMA CUTTING
Thanks to its inverter technology combines compact dimensions and low weight with excellent cutting performances, up to 22 mm thick on steel (separation up to 30 mm).
Configuration at delivery including 6 m P70 torch and earth cable.
• Automatic setting of appropriate voltage within the following ranges: 3x208/220/230V e 400/440V,
• Automatic detection of phase presence both upon start-up and during operation,
• Pilot arc,
• High Frequency/Voltage start,
• “Post-gas” function,
• Self Restart Pilot function for nets and grids cutting,
• Safety systems on the torch,
• Control and gauge for the presence of compressed air flow and thermostatic protection.
• Microprocessor-controlled cutting parameters and functions.
• Cutting current is not affected by voltage fluctuations, by change of distance between torch and piece as well as by the torch travelling speed.
• Possibility to be connected to motor-driven generators.
Technical data:
|
Code
|
P00473
|
|
|
Item
|
PLASMA 77 HF INVERTER
|
|
|
Input Voltage
|
3x208-220-230V 50-60HZ
|
3x400-440V 50-60HZ
|
|
|
Absorbed power
|
30% 8 kVA
|
35% 9 KVA
|
|
|
Cutting current
|
20 ÷ 60 A
|
20 ÷ 70 A
|
|
|
Duty cycle – 10 MIN CYCLE ACCORDING TO EN 60974-1
|
30% 60A - 60% 50A - 100% 40A
|
35% 70A - 60% 60A - 100% 50A
|
|
|
Air pressure
|
4,7 bar
|
|
|
Air flow
|
180 l/min
|
|
|
Cut thickness on steel
|
16 - 22 mm
|
|
|
Max separation cut
|
30 mm
|
|
|
Protection class
|
IP 23
|
|
|
Construction standards
|
EN60974 – 1 / EN60974 – 7 / EN60974 – 10
|
|
|
Dimensions
|
220x440x460h mm
|
|
|
Weight
|
24 kg
|
|
Accessories:
Documents: