Product detail
DISCONTINUED PRODUCT
Description:
Three-phase DC power source with “CHOPPER” technology for plasma cutting suitable for any cutting requirement on any kind of metal.
It features excellent cutting speed and performace. It can cut up to 40 mm on steel and separate up to 55 mm and it is suitable for metal fabrication as well as servicing in general.
It offers the possibility to use water cooled torches (with the cooling unit) and to use the handier P70 torch.
The cutting current is not affected by mains voltage variations, change in the distance between the torch and the piece you are cutting or the speed at which you move forward.
Configuration at delivery including 6 m P150 torch and earth cable.
MAIN FEATURES
• Pilot arc, high frequency start, electrical safety systems on the torch, control and gauge for the presence of compressed air flow and thermostatic protection.
• Microprocessor-controlled cutting parameters and functions.
• Automatic High Voltage/Frequency pilot arc start with low irradiated disturbances.
• Automatic recognising of the type of torch and setting of the appropriate safety devices.
• Predisposition for using of water cooled torch (together with cooling unit)
• Cutting current is not affected by voltage fluctuations, by change of distance between torch and piece as well as by the torch travelling speed.
• By using the optional interface, it is possible for the pantograph computer to control from far:
• Cutting current setting in digital or isolated analog mode,
• Arc striking,
• Arc voltage (max. 10 VDC)
• Arc transfer, with adjustable delay from 0 to 2 seconds.
Different voltages available on request
Technical data:
|
Code
|
P00499
|
|
|
Item
|
PLASMA 166 CHOPPER
|
|
|
Input Voltage
|
3x400V 50-60Hz
|
|
|
Installation power
|
22 kW
|
|
|
Absorbed power
|
40% 27 KVA - 60% 22KVA - 100% 16 KVA
|
|
|
Cutting current
|
20 ÷ 160 A
|
|
|
Duty cycle – 10 MIN CYCLE ACCORDING TO EN 60974-1
|
40% 160A - 60% 120A - 100% 95A
|
|
|
Stepless regulation
|
ELECTRONIC
|
|
|
Air flow
|
220 l/min.
|
|
|
Air pressure
|
5 bar
|
|
|
Cut thickness on steel
|
40 mm
|
|
|
Max separation cut
|
55 mm
|
|
|
Protection class
|
IP 21
|
|
|
Construction standards
|
EN60974-1 - EN50199
|
|
|
Dimensions
|
mm 460x720x980h
|
|
|
Weight
|
kg 145
|
|
Accessories:
| 535497 |
6 m, P 70 hand torch, central adaptor6 m, P 70 hand torch, central adaptor |
(Optional) |
 |
| 356458 |
Wheeled torch holder for P50-P70Wheeled torch holder for P50-P70 |
(Optional) |
 |
| 309461 |
Wheeled compasses for P50 - P70Wheeled compasses for P50 - P70 |
(Optional) |
 |
| 535487 |
6 m, P 150 hand torch, central adaptor6 m, P 150 hand torch, central adaptor |
(Standard) |
 |
| 535494 |
12 m, P 150 hand torch, central adaptor12 m, P 150 hand torch, central adaptor |
(Optional) |
|
| 535486 |
6 m, P 150 machine torch, central adaptor6 m, P 150 machine torch, central adaptor |
(Optional) |
 |
| 535496 |
12 m, P 150 machine torch, central adaptor12 m, P 150 machine torch, central adaptor |
(Optional) |
|
| 356502 |
Wheeled torch holder for P150Wheeled torch holder for P150 |
(Optional) |
|
| 309488 |
Wheeled compasses for P150Wheeled compasses for P150 |
(Optional) |
 |
| 535489 |
6 m, P 150W water cooled machine torch, central adaptor
6 m, P 150W water cooled machine torch, central adaptor
|
(Optional) |
 |
| 540050 |
Computer-pantograph interfaceComputer-pantograph interface |
(Optional) |
 |
| 560010 |
CU06H - Horizontal 5 l cooling unit for torchCU06H - Horizontal 5 l cooling unit for torch |
(Optional) |
 |
| 535491 |
6 m, P 150W water cooled hand torch, central adaptor
6 m, P 150W water cooled hand torch, central adaptor
|
(Optional) |
 |
| 540052 |
External HF ignition unit for water cooled torchExternal HF ignition unit for water cooled torch |
(Optional) |
 |
| 535484 |
4m, shielded, water cooled, P 150W machine torch for external HF unit4m, shielded, water cooled, P 150W machine torch for external HF unit |
(Optional) |
 |
| 530350 |
16m, water cooled, extension for external HF unit16m, water cooled, extension for external HF unit |
(Optional) |
|
Documents: