Product detail
Description:
Single-phase power source, inverter based, suitable for welding in MIG/MAG mode and, by polarity reverse, with flux cored wire with no gas protection.
It has a compact design, low weight and offers the possibility to be connected to home mains (3kW) and to motor-driven generators with an adequate power.
Thanks to all these characteristics, it is an ideal machine for maintenance, repair, installation and on site welding.
MAIN FEATURES
• It has synergic curves for iron and flux cored wire optimized to obtain exceptional arc stability and reduce post-welding works.
• A dedicated control is provided for fine tuning the arc length.
• Equipped with PFC (Power Factor Correction) device to reduce and stabilize the power absorption.
• Low power consumption.
• EURO connection for MIG torch.
• Supplied with earth cable.
Technical data:
|
Code
|
S00219
|
|
|
Item
|
MIG 1710 SYNERGIC
|
|
|
Input Voltage
|
1x230V 50-60Hz
|
|
|
Absorbed power
|
35% 4,2 kVA - 60% 3,7 kVA - 100% 3,2 kVA
|
|
|
MIN-MAX Welding current
|
18 – 180 A
|
|
|
Duty cycle – 10 MIN CYCLE ACCORDING TO EN 60974-1
|
35% 160A - 60% 140A - 100% 120A
|
|
|
Regulation steps
|
Electronic stepless regulation
|
|
|
Wire size (solid)
|
Ø mm 0,6 -0,8 - 1,0
|
|
|
Wire size (cored)
|
Ø mm 0,9
|
|
|
Max. wire spool size
|
Ø 200 mm / 5 kg.
|
|
|
Protection class
|
IP23
|
|
|
Construction standards
|
EN60974 – 1 / EN60974-10
|
|
|
Dimensions
|
210x425x435h mm
|
|
|
Weight
|
14 kg
|
|
Accessories:
Documents: