Produkt-Detail
Beschreibung:
Single phase AC/DC INVERTER power source for TIG welding with high frequency and MMA-SMAW welding. Equipped with pulsed arc mode. Suitable for welding of aluminium, brass and magnesium in TIG AC mode as well as iron, steel, stainless steel, copper in TIG DC mode.
Equipped with graphic auto-adaptative interface display.
STANDARD FEATURES AND SPECIAL FUNCTIONS
• In TIG AC, penetration and cleansing of welding bath are adjustable.
• In AC mode, frequency can be adjusted.
• E-PULSE function to reduce thermal alteration and simplify welding of thin coil.
• 2-stage, 4-stage and 4 stage bilevel functions.
• Possibility to set the time of PREGAS, POSTGAS, SLOPE UP and SLOPE DOWN.
• Possibility of storing up to 10 welding programs in memory which may be easily re-called.
• In MMA-SMAW mode, it allows welding with rutile and basic coated electrodes.
• Possibility to be connected to motor-driven generators equipped with an electronic regulator of the tension (not greater than 260V RMS) and a power equal to or greater than 6,5 kVA (SINGLE-PHASE).
• Microprocessor control of welding functions.
• IP23 protection to allow open-air works.
• It is equipped with PFC (Power Factor Correction) device to reduce and stabilize the absorbed power.
• Possibility to activate a security password.
• Small dimensions and light weight.
• Presetting for use of water cooled torches with the cooling unit.
• Optional trolley for transport.
OPTIONAL SPECIAL FUNCTIONS
• E-START
• E-ARC
• E-SPOT
• E-MULTIPOINT
• E-TWOPULSE
• E-MIX
• E-FUSION
technische Daten:
|
Code
|
S00168
|
|
|
Item
|
TIG 2015 AC/DC HF
|
|
|
Mode
|
TIG
|
MMA
|
|
|
Input Voltage
|
1x230V 50-60Hz
|
|
|
Installation power
|
4 kW
|
|
|
MIN-MAX Welding current
|
5 ÷ 200 A
|
10 ÷ 160 A
|
|
|
Duty cycle – 10 MIN CYCLE ACCORDING TO EN 60974-1
|
40% 200A - 60% 160A - 100% 120A
|
35% 160A - 60% 130A - 100% 115A
|
|
|
Electrodes
|
|
Ø mm 1,6 ÷ 4
|
|
|
Stepless regulation
|
ELECTRONIC
|
|
|
Protection class
|
IP 23
|
|
|
Construction standards
|
EN60974-1 / EN60974-10
|
|
|
Dimensions
|
220x440x460h mm
|
|
|
Weight
|
19 kg
|
|
Video
Special function for TIG welding: E-START
Special function for TIG welding: E-ARC
Special function for TIG welding: E-SPOT
Special function for TIG welding: E-MULTIPOINT
Special function for TIG welding: E-FUSION
Zubehöre:
| 535802 |
4 m, ABITIG 26 torch4 m, ABITIG 26 torch |
(Optional) |
 |
| 535805 |
4 m, ABITIG 26 UP-DOWN torch4 m, ABITIG 26 UP-DOWN torch |
(Optional) |
 |
| 535806 |
4 m, ABITIG 18 water cooled torch4 m, ABITIG 18 water cooled torch |
(Optional) |
 |
| 535807 |
4 m, ABITIG 18 UP-DOWN water cooled torch4 m, ABITIG 18 UP-DOWN water cooled torch |
(Optional) |
 |
| 530137 |
Earth cable for weldingEarth cable for welding |
(Optional) |
 |
| S01705A.11 |
Zubehörset für das Elektrodenschweissen mit 3+2 m Kabel 25 mm2, Texas 50Zubehörset für das Elektrodenschweissen mit 3+2 m Kabel 25 mm2, Texas 50 |
(Optional) |
 |
| 560010 |
CU06H - Horizontal 5 l cooling unit for torchCU06H - Horizontal 5 l cooling unit for torch |
(Optional) |
 |
| 580002 |
Fahrwagen für TransportFahrwagen für Transport |
(Optional) |
 |
| 540102 |
INOX FAST CLEAN KITINOX FAST CLEAN KIT |
(Optional) |
 |
| 570006 |
Remote controlRemote control |
(Optional) |
 |
| 570008 |
TIG foot controlTIG foot control |
(Optional) |
 |
| 363307 |
Foot control and TIG torch connectorFoot control and TIG torch connector |
(Optional) |
 |
| 530330 |
5 m long cable for remote control5 m long cable for remote control |
(Optional) |
 |
| 309269 |
Helmet with auto-dimming LCD filter (9-13 DIN) MAXIVISION COLOR to protect face and eyes during welding.Helmet with auto-dimming LCD filter (9-13 DIN) MAXIVISION COLOR to protect face and eyes during welding. |
(Optional) |
 |
| 357502 |
Druckminderer mit 2 ManometernDruckminderer mit 2 Manometern |
(Optional) |
 |
Unterlagen: