Produkt-Detail
AUβER PRODUKTION
Beschreibung:
Three-phase power source for MIG-MAG wire welding.
Suitable to be used with traditional and synergic wire feed units and with 5 or 10 m long power source – wire feeder cart connection extensions.
It is suitable to weld steel, stainless steel and aluminium.
It is suitable for welding with cored wire.
- Timer circuit to automatically switch the generator to stand-by mode when not welding, to prevent unnecessary power consumption.
- Multiple impedance outlet for improved welding characteristic adjustment
- Wire feeder cart - power source connection through an extension with military-type connectors
- Possibility to use synergic wire feed units with microprocessor for automatic welding current and wire speed adjustment via 17 pre-stored programs
- By using synergic wire feed units, it is possible to handle welding parameters such as spot welding, soft start, burn-back, post gas, and 2 stage – 4 stage (manual – automatic) welding modes; it is also possible to update the software with new synergy curves if any
- Highly stable thanks to large-diameter rear wheels
technische Daten:
|
Code
|
S00299
|
|
|
Item
|
SYNERGIC PRO MIG 575
|
|
|
Input Voltage
|
3x230/400V 50-60Hz
|
|
|
Absorbed power
|
50% 27,0KVA
|
|
|
MIN-MAX Welding current
|
40 – 550 A
|
|
|
Duty cycle – 10 MIN CYCLE ACCORDING TO EN 60974-1
|
50% 500A - 60% 450A - 100% 350A
|
|
|
Regulation steps
|
N° 4x8
|
|
|
Wire size (solid)
|
Solid Ø mm 0,8 - 1 - 1,2 - 1,6 - Cored 1,2
|
|
|
Max. wire spool size
|
Ø 300 mm / 15 kg.
|
|
|
Protection class
|
IP21C
|
|
|
Construction standards
|
EN 60974 – 1 / EN50199
|
|
|
Dimensions
|
558x980x1330h mm
|
|
|
Weight
|
187 kg
|
|
Zubehöre:
| 535019 |
3 m, MB 501D Brenner, vorbereit für Wasserkühlung3 m, MB 501D Brenner, vorbereit für Wasserkühlung |
(Optional) |
 |
| 535020 |
4 m, MB 501D Brenner, vorbereit für Wasserkühlung4 m, MB 501D Brenner, vorbereit für Wasserkühlung |
(Optional) |
|
| 535017 |
3 m, MB 40 torch3 m, MB 40 torch |
(Optional) |
 |
| 535018 |
4 m, MB 40 torch
4 m, MB 40 torch
|
(Optional) |
|
| 550030 |
WF 20 - 2-roll wire feeder WF 20 - 2-roll wire feeder |
(Optional) |
 |
| 550031 |
WF 40 - 4-roll wire feeder ready for torch cooling unitWF 40 - 4-roll wire feeder ready for torch cooling unit |
(Optional) |
 |
| 550025 |
SYNERGIC WF 44 - synergic 4-roll wire feeder ready for cooling unit, with digital meter.SYNERGIC WF 44 - synergic 4-roll wire feeder ready for cooling unit, with digital meter. |
(Optional) |
 |
| 530337 |
5 m, Verlängerungskabel aus Kupfer mit D. 50 mm2 5 m, Verlängerungskabel aus Kupfer mit D. 50 mm2 |
(Optional) |
 |
| 530338 |
10 m, Verlängerungskabel aus Kupfer mit D. 50 mm2.10 m, Verlängerungskabel aus Kupfer mit D. 50 mm2. |
(Optional) |
|
| 530340 |
5 m, extension for wire feed unit with copper cable diam. 95 mm2 ready for cooling unit.
5 m, extension for wire feed unit with copper cable diam. 95 mm2 ready for cooling unit.
|
(Optional) |
 |
| 530341 |
10 m, extension for wire feed unit with copper cable diam. 95 mm2 ready for cooling unit.10 m, extension for wire feed unit with copper cable diam. 95 mm2 ready for cooling unit. |
(Optional) |
|
| 560200 |
CU44V - Vertical 4 l cooling unit for torch.CU44V - Vertical 4 l cooling unit for torch. |
(Optional) |
 |
| 540011 |
Aluminiumset für Drähte Ø 0,8 - 1 und für 3m Brenner.Aluminiumset für Drähte Ø 0,8 - 1 und für 3m Brenner. |
(Optional) |
 |
| 540014 |
Aluminiumset für Drähte Ø 1,2 - 1,6 und für 3m Brenner.Aluminiumset für Drähte Ø 1,2 - 1,6 und für 3m Brenner. |
(Optional) |
|
| 384024 |
Adapter for wire reels of 15 kg. D. 300Adapter for wire reels of 15 kg. D. 300 |
(Optional) |
 |
| 309263 |
Welding helmet with auto-dimming LDC filter BEST VISION,Welding helmet with auto-dimming LDC filter BEST VISION, |
(Optional) |
 |
Unterlagen: