detalle del producto
DESCONTINUADO
descripción:
The single-phase power source with inverter technology for metal plasma cutting, model PLASMA 26 COMPRESSOR INVERTER is equipped with a built-in air compressor (with self-lubricating piston) that allows the operator to work in full autonomy.
It features low weight and compact dimensions, easy handling and user-friendliness (it does not require any adjustment of the current or of the air), an excellent cutting efficiency and the possibility to be connected to home mains (3kW) and to generators of adequate power.
It's equipped with PFC (Power Factor Correction) device to reduce and stabilize the power absorption.
The recommended steel thickness to obtain the best cutting quality is 6 mm, but it is possible to cut up to 8 mm. The separation thickness is 10 mm.
The lack of High-Frequency start makes it possible to work next to computers, medical equipment, instruments and any other electronic devices sensitive to high frequency emissions.
It’s particularly suitable for on-site jobs, maintenance and repairs.
MAIN FEATURES
• Pilot Arc to cut painted or coated metals.
• Pilot Arc Start without HF.
• Post-gas function.
• Safety systems on the torch.
• Control of presence of compressed air pressure.
• Microprocessor-controlled cutting parameters and functions.
• Thermostatic protection.
• Its standard equipment includes a 4 metre-long P25 torch and a grounding cable.
datos técnicos:
|
Code
|
P00484
|
|
|
Item
|
PLASMA 26 COMPRESSOR INVERTER
|
|
|
Input Voltage
|
1x230V 50-60Hz
|
|
|
Absorbed power
|
35% 2,8 kVA
|
|
|
Cutting current
|
20 A
|
|
|
Duty cycle – 10 MIN CYCLE ACCORDING TO EN 60974-1
|
35% 20A
|
|
|
Cut thickness on steel
|
6 - 8 mm
|
|
|
Max separation cut
|
10 mm
|
|
|
Protection class
|
IP23
|
|
|
Construction standards
|
EN 60974 – 1 / EN 60974 – 7 / EN 60974 – 10
|
|
|
Dimensions
|
210x350x460h mm
|
|
|
Weight
|
16 kg
|
|
Video
PLASMA 26 COMPRESSOR INVERTER
accessorios:
documentos: