soldadoras TIG/MMA/MIG/MAG, GENERADORES DE CORTE POR PLASMA, ASPIRADORAS DE POLVOS Y LíQUIDOS

ita eng deu fra esp

detalle del producto

DESCONTINUADO
Código: S00107

modelo:
TIG 1680 DC HF

descarga pestaña en. Pdf

Synergic Plasma
descripción:
Single-phase inverter power source for TIG welding with high frequency and MMA-SMAW, TIG 1680 DC HF is equipped with high frequency start, pulsed arc mode and is suitable for welding of iron, steel, stainless steel, copper and titanium.
The TIG 1680 DC HF model provides a current of 160 A with 40% duty cycle (EN60974-1).
It welds coated rutile and basic electrodes.
It's suitable for light-medium metal fabrication as well as for servicing in general.

MAIN FEATURES
• Pulsed Arc function to reduce thermal alteration and simplify welding of thin coils.
• Functions: 2-step, 4-step and 4-step dual level.
• Possibility of welding with two preset welding current levels (dual level)
• Preset for use with remote control by pedal, manual or up-down control on the torch.
• In TIG welding the arc may be started either with high voltage – high frequency (HF Start) or by contact (Contact Start).
• Possibility of storing up to 9 welding programs in memory which may be easily re-called.
• Microprocessor control of the welding functions.

ADVANTAGES
• Minimized thermal alteration for welding of thin coils
• Great arc stability
• Control panel with easy-to-operate controls
• Possibility of adjusting current directly on the torch UP-DOWN
• IP23C protection class to allow outdoor work
• High efficiency and low absorption from mains
• Compact design and low weight.
• Strong steel body with epoxy, scratch proof, bake oven powder coating.

datos técnicos:

Code S00107
Item TIG 1680 DC HF
Mode TIG MMA
Input Voltage 1x230V 50-60Hz
Installation power 3 kW
MIN-MAX Welding current 5 ÷ 160 A 10 ÷ 140 A
Duty cycle – 10 MIN CYCLE ACCORDING TO EN 60974-1 40% 160A - 60% 145A - 100% 130A 35% 140A - 60% 125A - 100% 115A
Electrodes Ø mm 1,6 ÷ 3,2
Stepless regulation ELECTRONIC
Protection class IP 23 C
Construction standards EN60974-1 / EN50199
Dimensions mm 180x360x410h
Weight kg 11

accessorios:

535802 4 m, ABITIG 26 torch4 m, ABITIG 26 torch (Optional)
535805 4 m, ABITIG 26 UP-DOWN torch4 m, ABITIG 26 UP-DOWN torch (Optional)
530137 Earth cable for TIG weldingEarth cable for TIG welding (Optional)
S01705A.11 Accessories kit for electrode welding with 3+2 m cables of 25 mm2, Texas 50Accessories kit for electrode welding with 3+2 m cables of 25 mm2, Texas 50 (Optional)
580002 Transport cartTransport cart (Optional)
570008 TIG foot controlTIG foot control (Optional)
570006 Remote controlRemote control (Optional)
530330 5 m long cable for remote control5 m long cable for remote control (Optional)
363307 Foot control and TIG torch connectorFoot control and TIG torch connector (Optional)

documentos:

TIG 1680 DC HF - TIG 2080 DC HF MANUAL DE INSTRUCCIONESMANUAL DE INSTRUCCIONES download
TIG 1680 DC HF - TIG 2080 DC HF PIEZAS DE REPUESTOPIEZAS DE REPUESTO download
TIG 1680 DC HF - TIG 2080 DC HF ELECTRICAL DIAGRAMSELECTRICAL DIAGRAMS download
SAFETYRULES-EMC MANUAL DE INSTRUCCIONESMANUAL DE INSTRUCCIONES download