soldadoras TIG/MMA/MIG/MAG, GENERADORES DE CORTE POR PLASMA, ASPIRADORAS DE POLVOS Y LíQUIDOS

ita eng deu fra esp

detalle del producto

DESCONTINUADO
Código: S00153

modelo:
TIG 1581 DC HF

descarga pestaña en. Pdf

Synergic Plasma
descripción:
Single phase INVERTER portable power source for TIG welding with high frequency and MMA-SMAW welding. Suitable for welding of iron, steel, stainless steel, copper and titanium.
It is suitable for assembling of external plants, on-site maintenance operations and hard to reach spaces, applications in small-sized production plants and repair works.
MAIN FEATURES
• Stable arc.
• Easy to use.
• Microprocessor control of welding functions.
• 2-stage, 4 stage functions.
• Slope-down and post-gas adjustment.
• Presetting for remote control.
• In TIG mode, the arc may be started ether in high frequency (HF Start) or by contact (Contact Start).
• In MMA-SMAW mode, it allows welding with rutile and basic coated electrodes.
• Forced air cooling through cooling tunnel.
• Possibility to be connected to household mains or to motor-driven generators with an electronic regulator of the tension (not greater than 260V RMS) and a power equal to or greater than 4,8 kVA.
• Equipped with strong shoulder strap.
• Possibility of using 50 m long power cables with no significant power losses.
• IP23 protection to allow open-air works.
• Manufactured in compliance with the IEC/EN 61000-3-12 standard by means of the PFC devices.
• Small dimensions and light weight.
• On request, it's available complete with suitcase and accessories.

datos técnicos:

Code S00153
Item TIG 1581 DC HF
Mode TIG MMA
Input Voltage 1x230V 50-60Hz
Installation power 3 kW
MIN-MAX Welding current 5 ÷ 160 A 10 ÷ 140 A
Duty cycle – 10 MIN CYCLE ACCORDING TO EN 60974-1 40% 160A - 60% 135A - 100% 110A 30% 140A - 60% 115A - 100% 95A
Electrodes Ø mm 1,6 ÷ 3,2
Stepless regulation ELECTRONIC
Protection class IP 23
Insulation class H
Construction standards EN60974-1 EN60974-10
Dimensions 135x425x280h mm
Weight 9,5 kg

accessorios:

535802 4 m, ABITIG 26 torch4 m, ABITIG 26 torch (Optional)
535805 4 m, ABITIG 26 UP-DOWN torch4 m, ABITIG 26 UP-DOWN torch (Optional)
530137 Earth cable for TIG weldingEarth cable for TIG welding (Optional)
S01705A.11 Accessories kit for electrode welding with 3+2 m cables of 25 mm2, Texas 50Accessories kit for electrode welding with 3+2 m cables of 25 mm2, Texas 50 (Optional)
570008 TIG foot controlTIG foot control (Optional)
570006 Remote controlRemote control (Optional)
530330 5 m long cable for remote control5 m long cable for remote control (Optional)
363307 Foot control and TIG torch connectorFoot control and TIG torch connector (Optional)
590007 Case for power source and accessoriesCase for power source and accessories (Optional)
S00153.A18 Power source with case, TIG torch and earth cablePower source with case, TIG torch and earth cable (Optional)

documentos:

TIG 1581 DC HF MANUAL DE INSTRUCCIONESMANUAL DE INSTRUCCIONES download
SAFETYRULES-EMC MANUAL DE INSTRUCCIONESMANUAL DE INSTRUCCIONES download