detalle del producto
DESCONTINUADO
descripción:
The single-phase AC/DC inverter power source for TIG welding with high frequency and MMA-SMAW, TIG 2210 AC/DC, is equipped with high frequency start and pulsed arc mode.
It is suitable for light-medium metal fabrication as well as for servicing in general.
MAIN FEATURES:
• In TIG AC mode, it welds aluminium, magnesium and brass as well as ferrous materials in TIG DC mode.
• In AC mode, frequency can be adjusted.
• In TIG AC mode, it automatically recalls the welding program relative to the diameter of the electrode in use.
• Penetration and cleansing of welding bath are adjustable.
• Suitable to weld in MMA-SMAW mode both rutile and basic electrodes.
• Pulsed arc to reduce alteration of workpiece due to heat, hence to allow welding of thin coils.
• 2-stage, 4-stage and 4-stage-bilevel functions.
• Possibility of welding within two pre-set current levels (bilevel).
• Optional remote controls: foot-operated, hand-operated with knob or torch-mounted up-down control.
• In TIG welding, either HF Start or Contact Start can be selected.
• Up to 9 welding programs can be stored in the memory and easily recalled.
• Microprocessor control.
• Compact design and light weight construction.
ADVANTAGES
• Minimized thermal alteration for welding of thin coils
• Great arc stability
• Control panel with easy-to-operate controls
• Possibility of adjusting current directly on the torch UP-DOWN
• Forced air cooling through cooling tunnel
• IP23C protection class to allow outdoor work
• High efficiency and low absorption from mains
• Compact design and low weight.
• Strong steel body with epoxy, scratch proof, bake oven powder coating.
datos técnicos:
|
Code
|
S00115
|
|
Item
|
TIG 2210 AC/DC
|
|
Mode
|
TIG
|
MMA
|
|
Input Voltage
|
1x230V 50-60Hz
|
|
Installation power
|
4 kW
|
|
MIN-MAX Welding current
|
5 ÷ 200 A
|
10 ÷ 160 A
|
|
Duty cycle – 10 MIN CYCLE ACCORDING TO EN 60974-1
|
35% 200A - 60% 170A - 100% 150A
|
35% 160A - 60% 130A - 100% 115A
|
|
Electrodes
|
|
Ø mm 1,6 ÷ 4
|
|
Stepless regulation
|
ELECTRONIC
|
|
Protection class
|
IP 23 C
|
|
Insulation class
|
H
|
|
Construction standards
|
EN60974-1 EN50199
|
|
Dimensions
|
mm 220x390x460h
|
|
Weight
|
kg 21
|
accessorios:
documentos: