soldadoras TIG/MMA/MIG/MAG, GENERADORES DE CORTE POR PLASMA, ASPIRADORAS DE POLVOS Y LíQUIDOS

ita eng deu fra esp

detalle del producto

DESCONTINUADO
Código: S00164

modelo:
TIG 1710 AC/DC HF

anexo anexo: descarga catálogo

descarga pestaña en. Pdf

Synergic Plasma
descripción:
Single phase AC/DC INVERTER portable power source for TIG welding with high frequency and MMA-SMAW welding.
Equipped with high frequency start and pulsed arc mode. Suitable for welding of aluminium, brass and magnesium in TIG AC mode as well as iron, steel, stainless steel, copper in TIG DC mode. Its many functions make it suitable for a wide range of applications.

MAIN FEATURES
• Great arc stability.
• Top quality welding (in TIG AC mode) on aluminium and its alloys.
• In TIG AC, penetration and cleansing of welding bath are adjustable.
• In AC mode, frequency can be adjusted.
• Pulsed arc function to reduce thermal alteration and simplify welding of thin coil.
• In TIG mode, the arc may be started ether in high frequency (HF Start) or by contact (Contact Start).
• 2-stage, 4-stage and 4 stage dual level functions.
• Possibility of storing up to 9 welding programs in memory which may be easily re-called.
• Presetting for remote control.
• In MMA-SMAW mode, it allows welding with rutile and basic coated electrodes.
• Possibility to be connected to motor-driven generators with an electronic regulator of the tension (not greater than 260V RMS) and a power equal to or greater than 4,5 kVA.
• Microprocessor control of welding functions.
• IP23 protection to allow open-air works.
• Manufactured in compliance with the IEC/EN 61000-3-12 standard by means of the PFC devices.
• Possibility to activate a security password.
• Small dimensions and light weight.
• Optional trolley for transport.

datos técnicos:

Code S00164
Item TIG 1710 AC/DC
Mode TIG MMA
Input Voltage 1x230V 50-60Hz
Installation power 3 kW
MIN-MAX Welding current 5 ÷ 170 A 10 ÷ 140 A
Duty cycle – 10 MIN CYCLE ACCORDING TO EN 60974-1 35% 170A - 60% 145A - 100% 130A 35% 140A - 60% 125A - 100% 115A
Electrodes Ø mm 1,6 ÷ 3,2
Stepless regulation ELECTRONIC
Protection class IP 23
Insulation class H
Construction standards EN 60974-1 EN60974-10
Dimensions 220x440x460h mm
Weight 19 kg

accessorios:

535802 4 m, ABITIG 26 torch4 m, ABITIG 26 torch (Optional)
535805 4 m, ABITIG 26 UP-DOWN torch4 m, ABITIG 26 UP-DOWN torch (Optional)
580002 Transport cartTransport cart (Optional)
530137 Earth cable for TIG weldingEarth cable for TIG welding (Optional)
S01705A.11 Accessories kit for electrode welding with 3+2 m cables of 25 mm2, Texas 50Accessories kit for electrode welding with 3+2 m cables of 25 mm2, Texas 50 (Optional)
570008 TIG foot controlTIG foot control (Optional)
570006 Remote controlRemote control (Optional)
530330 5 m long cable for remote control5 m long cable for remote control (Optional)
363307 Foot control and TIG torch connectorFoot control and TIG torch connector (Optional)

documentos:

TIG 1710 - 2310 AC/DC MANUAL DE INSTRUCCIONESMANUAL DE INSTRUCCIONES download
TIG 1710 AC/DC PIEZAS DE REPUESTOPIEZAS DE REPUESTO download
TIG 1710 AC/DC ELECTRICAL DIAGRAMSELECTRICAL DIAGRAMS download
SAFETYRULES-EMC MANUAL DE INSTRUCCIONESMANUAL DE INSTRUCCIONES download