detalle del producto
DESCONTINUADO
descripción:
The tri-phase AC/DC inverter power source for TIG welding with high frequency and MMA-SMAW, TIG 3510 AC/DC, is equipped with high frequency start and pulsed arc mode.
Thanks to its many functions, it is suitable for various applications.
MAIN FEATURES:
• In TIG AC mode, it welds aluminium, magnesium and brass as well as ferrous materials, copper and titanium in TIG DC mode.
• Top quality TIG AC welding on aluminium and its alloys.
• In synergic mode, upon selecting the material to be welded, the corresponding thickness and the welding position, the power source automatically adjusts all the other welding parameters.
• In AC mode, it allows the operator to customize both the penetration and cleansing of the welding bead.
• In AC, possibility of choosing among nine possible combinations of the three waveforms: delta, square, sine.
• In AC mode, frequency can be adjusted.
• Pulsed Arc function to reduce thermal alteration and simplify welding of thin coils.
• Optional remote controls: foot-operated, hand-operated with knob or torch-mounted up-down control.
• In TIG welding the arc may be started either with high voltage – high frequency (HF Start) or by contact (Contact Start).
• Predisposition to use water cooled torches.
• Storage up to 9 welding programs in memory which may be easily re-called.
• Suitable to weld in MMA-SMAW mode both rutile and basic electrodes.
• Microprocessor control of the welding functions.
ADVANTAGES
• Minimized thermal alteration for welding of thin coils.
• Great arc stability.
• Control panel with easy-to-operate controls.
• Possibility of adjusting current directly on the torch UP-DOWN.
• Forced air cooling through cooling tunnel.
• IP23 protection class to allow outdoor work.
• High efficiency and low absorption from mains.
• Possibility to be connected to motor-driven generators.
• Compact design and low weight.
datos técnicos:
|
Code
|
S00119
|
|
Item
|
TIG 3510 AC/DC
|
|
Mode
|
TIG
|
MMA
|
|
Input Voltage
|
3x400V 50-60Hz
|
|
Absorbed power
|
40% 10,4 kVA 60% 10,1 kVA 100% 9,7 kVA
|
40% 14,5 kVA 60% 14 kVA 100% 13,5 kVA
|
|
MIN-MAX Welding current
|
5 ÷ 330 A
|
10 ÷ 330 A
|
|
Duty cycle – 10 MIN CYCLE ACCORDING TO EN 60974-1
|
40% 330 A 60% 320 A 100% 310 A
|
40% 330 A 60% 320 A 100% 310 A
|
|
Electrodes
|
|
Ø mm 1,6 ÷ 6
|
|
Stepless regulation
|
ELECTRONIC
|
|
Protection class
|
IP 23 C
|
|
Insulation class
|
H
|
|
Construction standards
|
EN60974-1 / EN60974-10
|
|
Dimensions
|
330x600x540h mm
|
|
Weight
|
39 kg
|
accessorios:
| S01704A.10 |
Accessories kit for electrode welding with 5+3,5 m cables of 35 mm2 and "texas" connection 50Accessories kit for electrode welding with 5+3,5 m cables of 35 mm2 and "texas" connection 50 |
(Optional) |
 |
| 570006 |
Remote controlRemote control |
(Optional) |
 |
| 530330 |
5 m long cable for remote control5 m long cable for remote control |
(Optional) |
 |
| 535802 |
4 m, ABITIG 26 torch4 m, ABITIG 26 torch |
(Optional) |
 |
| 530138 |
Cable de tierra para soldarCable de tierra para soldar |
(Optional) |
 |
| 570008 |
TIG foot controlTIG foot control |
(Optional) |
 |
| 363307 |
Foot control and TIG torch connectorFoot control and TIG torch connector |
(Optional) |
 |
| 535805 |
4 m, ABITIG 26 UP-DOWN torch4 m, ABITIG 26 UP-DOWN torch |
(Optional) |
 |
| 535806 |
4 m, ABITIG 18 water cooled torch4 m, ABITIG 18 water cooled torch |
(Optional) |
 |
| 535807 |
4 m, ABITIG 18 UP-DOWN water cooled torch4 m, ABITIG 18 UP-DOWN water cooled torch |
(Optional) |
 |
| 560101 |
CU55H - Horizontal 5 l cooling unit for torchCU55H - Horizontal 5 l cooling unit for torch |
(Optional) |
 |
| 580003 |
Transport cartTransport cart |
(Optional) |
 |
documentos: