soldadoras TIG/MMA/MIG/MAG, GENERADORES DE CORTE POR PLASMA, ASPIRADORAS DE POLVOS Y LíQUIDOS

ita eng deu fra esp

detalle del producto

DESCONTINUADO
Código: S00124

modelo:
TIG 1610 AC/DC

descarga pestaña en. Pdf

Synergic Plasma
descripción:
The single-phase AC/DC inverter power source for TIG welding with high frequency and MMA-SMAW, TIG 1610 AC/DC, is equipped with high frequency start and pulsed arc mode.
It is suitable for servicing in general.


MAIN FEATURES:
• In TIG AC mode, it welds aluminium, magnesium and brass as well as ferrous materials in TIG DC mode.
• Low power consumption: 3 KW maximum.
• In AC mode, frequency can be adjusted.
• In TIG AC mode, it automatically recalls the welding program relative to the diameter of the electrode in use.
• Penetration and cleansing of welding bath are adjustable.
• Suitable to weld in MMA-SMAW mode both rutile and basic electrodes.
• Pulsed arc to reduce alteration of workpiece due to heat, hence to allow welding of thin coils.
• 2-stage, 4-stage and 4-stage-bilevel functions.
• Possibility of welding within two pre-set current levels (bilevel).
• Optional remote controls: foot-operated, hand-operated with knob or torch-mounted up-down control.
• In TIG welding, either HF Start or Contact Start can be selected.
• Up to 9 welding programs can be stored in the memory and easily recalled.
• Microprocessor control.
• Compact design and light weight construction.

ADVANTAGES
• Minimized thermal alteration for welding of thin coils
• Great arc stability
• Control panel with easy-to-operate controls
• Possibility of adjusting current directly on the torch UP-DOWN
• Forced air cooling through cooling tunnel
• IP23C protection class to allow outdoor work
• High efficiency and low absorption from mains
• Compact design and low weight.
• Strong steel body with epoxy, scratch proof, bake oven powder coating.

datos técnicos:

Code S00124
Item TIG 1610 AC/DC
Mode TIG MMA
Input Voltage 1x230V 50-60Hz
Installation power 3 kW
MIN-MAX Welding current 5 ÷ 160 A 10 ÷ 140 A
Duty cycle – 10 MIN CYCLE ACCORDING TO EN 60974-1 40% 160A - 60% 145A - 100% 130A 35% 140A - 60% 125A - 100% 115A
Electrodes Ø mm 1,6 ÷ 3,2
Stepless regulation ELECTRONIC
Protection class IP 23 C
Insulation class H
Construction standards EN 60974-1 EN60974-10
Dimensions mm 220x390x460h
Weight kg 18

accessorios:

535802 4 m, ABITIG 26 torch4 m, ABITIG 26 torch (Optional)
535805 4 m, ABITIG 26 UP-DOWN torch4 m, ABITIG 26 UP-DOWN torch (Optional)
580002 Transport cartTransport cart (Optional)
530137 Earth cable for TIG weldingEarth cable for TIG welding (Optional)
S01705A.11 Accessories kit for electrode welding with 3+2 m cables of 25 mm2, Texas 50Accessories kit for electrode welding with 3+2 m cables of 25 mm2, Texas 50 (Optional)
570008 TIG foot controlTIG foot control (Optional)
570006 Remote controlRemote control (Optional)
530330 5 m long cable for remote control5 m long cable for remote control (Optional)
363307 Foot control and TIG torch connectorFoot control and TIG torch connector (Optional)

documentos:

TIG 1610 AC/DC MANUAL DE INSTRUCCIONESMANUAL DE INSTRUCCIONES download
TIG 1610 AC/DC PIEZAS DE REPUESTOPIEZAS DE REPUESTO download
TIG 1610 AC/DC ELECTRICAL DIAGRAMSELECTRICAL DIAGRAMS download
SAFETYRULES-EMC MANUAL DE INSTRUCCIONESMANUAL DE INSTRUCCIONES download