DESCONTINUADO
descripción:
Three-phase inverter power source for MIG-MAG wire welding with PULSE synergic operation and "multi-process", i.e. able to weld also in TIG and MMA mode.
Supplied complete with power source,4-roller wire feed unit ready for cooling, 5l horizontal cooling unit and power source cart.
It is suitable to weld steel, stainless steel and aluminium.
It is suitable for welding with cored wire.
MAIN FEATURES
• Minimised thermal alteration in the welding seam area even when thin parts are welded.
• Exceptionally good arc stability at low amp rating.
• Complete control and management of the variables determining the welding conditions with pulsed current, through the control panel.
• Synergic operation, that permits controlling the welding conditions through just one variable, all the others being preset and dependent on this.
• Wide range of memory stored synergic curves representing the most common welding operation conditions; new synergic curves can be afterwards added to the power source memory.
• With HD (high deposit)program allows to speed of a 30% at least the working time with pulse welding.
• The torch cooling unit can be controlled from the control panel.
• On request, an optional kit for Push-Pull torch is available (art. 540060) which permits using the most common brands of Push-Pull torches.
• On request, it's available a version with DOUBLE-PULSE operation.
|
Code
|
S00312
|
|
|
Item
|
INVERTER PRO MIG 465 PULSED
|
|
|
Mode
|
MIG
|
TIG
|
MMA
|
|
|
Input Voltage
|
3x400V 50-60Hz
|
3x400V 50-60Hz
|
3x400V 50-60Hz
|
|
|
Absorbed power
|
40% 15,9 kVA - 60% 13,2 kVA - 100% 11,7 kVA
|
40% 15,9 kVA - 60% 13,2 kVA - 100% 11,7 kVA
|
40% 15,9 kVA - 60% 13,2 kVA - 100% 11,7 kVA
|
|
|
MIN-MAX Welding current
|
5-380A
|
5-380A
|
10-340A
|
|
|
Duty cycle – 10 MIN CYCLE ACCORDING TO EN 60974-1
|
40% 380A - 60% 340A - 100% 310A
|
40% 380A - 60% 340A - 100% 310A
|
40% 340A - 60% 320A - 100% 280A
|
|
|
Stepless regulation
|
ELECTRONIC
|
|
|
Wire size (solid)
|
0,9/1,0/1,2/1,6 Al - 0,8/0,9/1,0/1,2/1,6 Fe-Inox - 0,8/0,9/1,0/1,2 CuSi 3% - 1,2/2,4 Cored Ø mm
|
-
|
-
|
|
|
Max. wire spool size
|
Ø 300 mm 15 kg
|
-
|
-
|
|
|
Electrodes
|
-
|
-
|
Ø 2 - 6 mm
|
|
|
Protection class
|
IP 23
|
|
|
Dimensions
|
780x1150x1450h mm
|
|
|
Weight
|
125 kg
|
|
| 535019 |
3 m, MB 501D torch, ready for cooling unit3 m, MB 501D torch, ready for cooling unit |
(Optional) |
 |
| 535020 |
4 m, MB 501D torch, ready for cooling unit4 m, MB 501D torch, ready for cooling unit |
(Optional) |
|
| 560101 |
CU55H - Horizontal 5 l cooling unit for torchCU55H - Horizontal 5 l cooling unit for torch |
(Standard) |
 |
| 550041 |
WF4 STP - synergic 4-roll wire feeder ready for torch cooling unitWF4 STP - synergic 4-roll wire feeder ready for torch cooling unit |
(Standard) |
 |
| 580003 |
Transport cartTransport cart |
(Standard) |
 |
| 535030 |
3,5 m, MIG 500A torch, ready for cooling unit3,5 m, MIG 500A torch, ready for cooling unit |
(Optional) |
 |
| 535031 |
3,5 m, MIG 500A torch, double up-down torch, ready for cooling unit3,5 m, MIG 500A torch, double up-down torch, ready for cooling unit |
(Optional) |
 |
| 535718 |
4 m, ABITIG 26 torch with EURO type connection4 m, ABITIG 26 torch with EURO type connection |
(Optional) |
 |
| 540060 |
Interface kit for push-pull torchesInterface kit for push-pull torches |
(Optional) |
 |
| 540012 |
Aluminium welding kit for Ø 1-1,2 wire and for 3,5 m torchAluminium welding kit for Ø 1-1,2 wire and for 3,5 m torch |
(Optional) |
 |
| 540013 |
Aluminium welding kit for Ø 1,2-1,6 wire and for 3,5 m torchAluminium welding kit for Ø 1,2-1,6 wire and for 3,5 m torch |
(Optional) |
|
| 530347 |
Extension for TIG weldingExtension for TIG welding |
(Optional) |
 |
| 356065 |
Wire guide liner kit for D. 1,0-1,2 Fe/stainless steel/cored wire for torch MIG 500AWire guide liner kit for D. 1,0-1,2 Fe/stainless steel/cored wire for torch MIG 500A |
(Optional) |
|
| 356066 |
Wire guide liner kit for D. 1,2-1,6 Fe/stainless steel/cored wire for torch MIG 500AWire guide liner kit for D. 1,2-1,6 Fe/stainless steel/cored wire for torch MIG 500A |
(Optional) |
|
| 384024 |
Adapter for wire reels of 15 kg. D. 300Adapter for wire reels of 15 kg. D. 300 |
(Optional) |
 |
| 309263 |
Welding helmet with auto-dimming LDC filter BEST VISION,Welding helmet with auto-dimming LDC filter BEST VISION, |
(Optional) |
 |
| 530360 |
5 m, extension for wire feed unit with copper cable diam. 70 mm2 ready for cooling unit.5 m, extension for wire feed unit with copper cable diam. 70 mm2 ready for cooling unit. |
(Optional) |
 |
| 530361 |
10 m, extension for wire feed unit with copper cable diam. 70 mm2 ready for cooling unit.10 m, extension for wire feed unit with copper cable diam. 70 mm2 ready for cooling unit. |
(Optional) |
|
| 357502 |
Flowmeter with 2 gas pressure gaugesFlowmeter with 2 gas pressure gauges |
(Optional) |
 |