detalle del producto
DESCONTINUADO
descripción:
Three-phase power source for MIG-MAG wire welding.
To be used with 2-roller WF21 or 4-roller WF41 wire feed units. These wire feed units are equipped with 1,5 m long power source – wire feeder cart connection extension.
It is possible to add power source – wire feeder cart connection extensions of 4 or 9 m long.
It is suitable to weld steel, stainless steel and aluminium.
- "EURO" type connection for the torch.
- Signal of intervention of the thermostat.
- High number of adjustments to facilitate achievement of the best welding parameters.
- Electronic regulator for spot welding.
- Highly stable thanks to large-diameter rear wheels.
datos técnicos:
|
Code
|
S00277.37
|
|
|
Item
|
PRO MIG 335
|
|
|
Input Voltage
|
3x230/400V 50-60Hz
|
|
|
Absorbed power
|
40% 11,2KVA
|
|
|
MIN-MAX Welding current
|
25 – 300 A
|
|
|
Duty cycle – 10 MIN CYCLE ACCORDING TO EN 60974-1
|
40% 250A - 60% 200A - 100% 160A
|
|
|
Regulation steps
|
N° 2x6
|
|
|
Wire size (solid)
|
Ø 0,6 - 0,8 – 1 - (1,2) mm SOLID
|
|
|
Max. wire spool size
|
Ø 300 mm / 15 kg.
|
|
|
Protection class
|
IP21C
|
|
|
Construction standards
|
EN60974 – 1 / EN60974-10
|
|
|
Dimensions
|
506x897x1245h mm
|
|
|
Weight
|
115 kg
|
|
accessorios:
| 535013 |
3 m, M 25 torch
3 m, M 25 torch
|
(Optional) |
 |
| 535014 |
4 m, M 25 torch
4 m, M 25 torch
|
(Optional) |
|
| 540011 |
Aluminium welding kit for Ø 0,8 - 1 wire and 3m torch.Aluminium welding kit for Ø 0,8 - 1 wire and 3m torch. |
(Optional) |
 |
| 540014 |
Aluminium welding kit for Ø 1,2 - 1,6 wire and 3m torch.Aluminium welding kit for Ø 1,2 - 1,6 wire and 3m torch. |
(Optional) |
|
| 550034 |
WF 21 - 2-roll wire feeder with 1,5 m extensionWF 21 - 2-roll wire feeder with 1,5 m extension |
(Optional) |
 |
| 530325 |
4 m extension for wire feed unit with copper cable diam. 35mm2 4 m extension for wire feed unit with copper cable diam. 35mm2 |
(Optional) |
 |
| 530326 |
9 m, extension for wire feed unit with copper cable diam. 35mm2 9 m, extension for wire feed unit with copper cable diam. 35mm2 |
(Optional) |
|
| 550035 |
WF 41 - 4-roll wire feeder with 1,5 m extensionWF 41 - 4-roll wire feeder with 1,5 m extension |
(Optional) |
 |
| 384024 |
Adapter for wire reels of 15 kg. D. 300Adapter for wire reels of 15 kg. D. 300 |
(Optional) |
 |
| 309263 |
Welding helmet with auto-dimming LDC filter BEST VISION,Welding helmet with auto-dimming LDC filter BEST VISION, |
(Optional) |
 |
documentos: