detalle del producto
DESCONTINUADO
descripción:
Three-phase power source for MIG-MAG wire welding.
Suitable to be used with traditional and synergic wire feed units and with 5 or 10 m long power source – wire feeder cart connection extensions.
It is suitable to weld steel, stainless steel and aluminium.
- Timer circuit to automatically switch the generator to stand-by mode when not welding, to prevent unnecessary power consumption.
- Multiple impedance outlet for improved welding characteristic adjustment
- Wire feeder cart - power source connection through an extension with military-type connectors
- Possibility to use synergic wire feed units with microprocessor for automatic welding current and wire speed adjustment via 12 pre-stored programs
- By using synergic wire feed units, it is possible to handle welding parameters such as spot welding, soft start, burn-back, post gas and 2 stage – 4 stage (manual – automatic) welding modes; it is also possible to update the software with new synergy curves if any
- Highly stable thanks to large-diameter rear wheels
datos técnicos:
|
Code
|
S00297
|
|
|
Item
|
SYNERGIC PRO MIG 475
|
|
|
Input Voltage
|
3x230/400V 50-60Hz
|
|
|
Absorbed power
|
40% 19,5KVA
|
|
|
MIN-MAX Welding current
|
40 – 450 A
|
|
|
Duty cycle – 10 MIN CYCLE ACCORDING TO EN 60974-1
|
40% 400A - 60% 330A - 100% 250A
|
|
|
Regulation steps
|
N° 4x8
|
|
|
Wire size (solid)
|
Ø 0,8 – 1 - 1,2 - (1,6) mm SOLID
|
|
|
Max. wire spool size
|
Ø 300 mm / 15 kg.
|
|
|
Protection class
|
IP21C
|
|
|
Construction standards
|
EN 60974 – 1 / EN 60974 - 10
|
|
|
Dimensions
|
558x980x1330h mm
|
|
|
Weight
|
153 kg
|
|
accessorios:
| 535019 |
Antorcha MB 501D, 3 m, predispuesta para la refrigeración con líquidoAntorcha MB 501D, 3 m, predispuesta para la refrigeración con líquido |
(Optional) |
 |
| 535020 |
Antorcha MB 501D, 4 m, predispuesta para la refrigeración con líquidoAntorcha MB 501D, 4 m, predispuesta para la refrigeración con líquido |
(Optional) |
|
| 535017 |
3 m, MB 40 torch3 m, MB 40 torch |
(Optional) |
 |
| 535018 |
4 m, MB 40 torch
4 m, MB 40 torch
|
(Optional) |
|
| 550030 |
WF 20 - 2-roll wire feeder WF 20 - 2-roll wire feeder |
(Optional) |
 |
| 550031 |
WF 40 - 4-roll wire feeder ready for torch cooling unitWF 40 - 4-roll wire feeder ready for torch cooling unit |
(Optional) |
 |
| 550025 |
SYNERGIC WF 44 - synergic 4-roll wire feeder ready for cooling unit, with digital meter.SYNERGIC WF 44 - synergic 4-roll wire feeder ready for cooling unit, with digital meter. |
(Optional) |
 |
| 530337 |
5 m, extension for wire feed unit with copper cable diam. 50 mm2.5 m, extension for wire feed unit with copper cable diam. 50 mm2. |
(Optional) |
 |
| 530338 |
10 m, extension for wire feed unit with copper cable diam. 50 mm2.10 m, extension for wire feed unit with copper cable diam. 50 mm2. |
(Optional) |
|
| 560200 |
CU44V - Vertical 4 l cooling unit for torch.CU44V - Vertical 4 l cooling unit for torch. |
(Optional) |
 |
| 540011 |
Aluminium welding kit for Ø 0,8 - 1 wire and 3m torch.Aluminium welding kit for Ø 0,8 - 1 wire and 3m torch. |
(Optional) |
 |
| 540014 |
Aluminium welding kit for Ø 1,2 - 1,6 wire and 3m torch.Aluminium welding kit for Ø 1,2 - 1,6 wire and 3m torch. |
(Optional) |
|
| 384024 |
Adapter for wire reels of 15 kg. D. 300Adapter for wire reels of 15 kg. D. 300 |
(Optional) |
 |
| 530360 |
5 m, extension for wire feed unit with copper cable diam. 70 mm2 ready for cooling unit.5 m, extension for wire feed unit with copper cable diam. 70 mm2 ready for cooling unit. |
(Optional) |
|
| 530361 |
10 m, extension for wire feed unit with copper cable diam. 70 mm2 ready for cooling unit.10 m, extension for wire feed unit with copper cable diam. 70 mm2 ready for cooling unit. |
(Optional) |
|
| 357502 |
Flowmeter with 2 gas pressure gaugesFlowmeter with 2 gas pressure gauges |
(Optional) |
 |
| 309073 |
Máscara completa con filtro de cristal líquido de oscurecimiento automático con ajuste de tono variable (9-13DIN) para la protección de la cara y los ojos durante las aplicaciones de corte y soldadura.Máscara completa con filtro de cristal líquido de oscurecimiento automático con ajuste de tono variable (9-13DIN) para la protección de la cara y los ojos durante las aplicaciones de corte y soldadura. |
(Optional) |
 |
| 309269 |
Helmet with auto-dimming LCD filter (9-13 DIN) MAXIVISION COLOR to protect face and eyes during welding.Helmet with auto-dimming LCD filter (9-13 DIN) MAXIVISION COLOR to protect face and eyes during welding. |
(Optional) |
 |
documentos: