Détails produit
PRODUIT HORS PRODUCTION
Description:
SINGLE-PHASE INVERTER POWER SOURCE FOR TIG WELDING WITH HIGH FREQUENCY
The single-phase DC inverter power source for TIG welding with high frequency and MMA-SMAW, TIG 1580 DC HF, is equipped with high frequency start and contact start.
It’s suitable for applications in small-sized production plants as well as repair and maintenance works.
It can be fed from motor-driven generators provided that they have an electronic regulator of the tension, a power equal to or greater than 6 kVA single-phase, and must not deliver a voltage greater than 260V.
MAIN FEATURES:
• In TIG mode, the arc may be started either in high frequency (HF Start) or by contant (Contact Start).
• 2-stage, 4-stage functions.
• Slope-Down and Post-Gas adjustment.
• Optional remote controls: foot –operated or hand-operated.
• In MMA-SMAW mode, it welds both coated rutile and basic electrodes.
• Microprocessor.
• High efficiency and low consumption.
• Great arc stability
• Control panel with easy-to-operate controls
• Forced air cooling through cooling tunnel
• IP23C protection class to allow outdoor work
• Compact design and low weight.
• Strong steel body with epoxy, scratch proof, bake oven powder coating.
Données techniques:
Code
|
S00103
|
Item
|
TIG 1580 DC HF
|
Mode
|
TIG
|
MMA
|
Input Voltage
|
1x230V 50-60Hz
|
Installation power
|
3 kW
|
MIN-MAX Welding current
|
5 ÷ 150 A
|
10 ÷ 140 A
|
Duty cycle – 10 MIN CYCLE ACCORDING TO EN 60974-1
|
40% 150A - 60% 130A - 100% 120A
|
30% 140A - 60% 125A - 100% 105A
|
Electrodes
|
|
Ø mm 1,6 ÷ 3,2
|
Stepless regulation
|
ELECTRONIC
|
Protection class
|
IP 23 C
|
Insulation class
|
H
|
Construction standards
|
EN60974-1 EN50199
|
Dimensions
|
135x390x280h mm
|
Weight
|
9 kg
|
Accessoires:
Documents: