Détails produit
Description:
The three-phase (MULTI VOLTAGE) inverter power source for TIG welding with high frequency and MMA-SMAW, TIG 2510 AC/DC HF, is equipped with high frequency start and pulsed arc mode.
Thanks to its many functions, it is suitable for various applications.
MAIN FEATURES:
• In TIG AC mode, it welds aluminium, magnesium and brass as well as stainless steel, iron and copper in TIG DC mode.
• Top quality TIG AC welding on aluminium and its alloys.
• Automatic recall of the welding program relevant to the diameter of the electrode in use.
• In AC mode, it allows the operator to customize both the penetration and cleansing of the welding bead.
• In AC mode, frequency can be adjusted.
• Pulsed Arc function to reduce thermal alteration and simplify welding of thin coils.
• Optional remote controls: foot-operated, hand-operated with knob or torch-mounted up-down control.
• In TIG welding the arc may be started either with high voltage – high frequency (HF Start) or by contact (Contact Start).
• Predisposition to use water cooled torches.
• Storage up to 9 welding programs in memory which may be easily re-called.
• Suitable to weld in MMA-SMAW mode both rutile and basic electrodes.
• Microprocessor control of the welding functions.
• Functions 4-time bi-level, 4-time tri-level and 4-time with SWP programme.
• Possibility to set the time of PREGAS, POSTGAS, SLOPE UP and SLOPE DOWN.
• Possibility to be connected to motor-driven generators.
• Possibility to activate a security PASSWORD.
ADVANTAGES
• Minimized thermal alteration for welding of thin coils.
• Great arc stability.
• Control panel with easy-to-operate controls.
• Possibility of adjusting current directly on the torch UP-DOWN.
• Forced air cooling through cooling tunnel.
• IP23 protection class to allow outdoor work.
• High efficiency and low absorption from mains.
• Compact design and low weight.
Données techniques:
|
Code
|
S00128
|
|
Item
|
TIG 2510 AC/DC HF
|
|
Mode
|
TIG
|
MMA
|
|
Input Voltage
|
3x208/220/230V 50-60 Hz
|
3x400/440 50-60Hz
|
3x208/220/230V 50-60 Hz
|
3x400/440 50-60Hz
|
|
Absorbed power
|
6 kVA
|
6 kVA
|
6 kVA
|
6 kVA
|
|
MIN-MAX Welding current
|
5 ÷ 250 A
|
10 ÷ 220 A
|
|
Duty cycle – 10 MIN CYCLE ACCORDING TO EN 60974-1
|
35% 250A - 60% 220A - 100% 200A
|
50% 250A - 60% 234A - 100% 230A
|
40% 220A - 60% 200A - 100% 180A
|
60% 220A - 100% 200A
|
|
Electrodes
|
-
|
Ø mm 1,6 ÷ 5
|
|
Stepless regulation
|
ELECTRONIC
|
|
Protection class
|
IP 23
|
|
Insulation class
|
H
|
|
Construction standards
|
EN60974-1 / EN60974-10
|
|
Dimensions
|
330x600x540h mm
|
|
Weight
|
35 kg
|
Accessoires:
| 535802 |
4 m, ABITIG 26 torch4 m, ABITIG 26 torch |
(Optional) |
 |
| 535805 |
4 m, ABITIG 26 UP-DOWN torch4 m, ABITIG 26 UP-DOWN torch |
(Optional) |
 |
| 535806 |
4 m, ABITIG 18 water cooled torch4 m, ABITIG 18 water cooled torch |
(Optional) |
 |
| 535807 |
4 m, ABITIG 18 UP-DOWN water cooled torch4 m, ABITIG 18 UP-DOWN water cooled torch |
(Optional) |
 |
| 530138 |
Câble de terre pour le soudageCâble de terre pour le soudage |
(Optional) |
 |
| S01714A.10 |
Kit d’accessoires avec 5+3,5m de câbles de 35 mm2, Texas 50Kit d’accessoires avec 5+3,5m de câbles de 35 mm2, Texas 50 |
(Optional) |
 |
| 560102 |
CU56H - Horizontal 5 l cooling unit for torchCU56H - Horizontal 5 l cooling unit for torch |
(Optional) |
 |
| 580007 |
Transport cartTransport cart |
(Optional) |
 |
| 570006 |
Remote controlRemote control |
(Optional) |
 |
| 530330 |
5 m long cable for remote control5 m long cable for remote control |
(Optional) |
 |
| 570008 |
TIG foot controlTIG foot control |
(Optional) |
 |
| 363307 |
Foot control and TIG torch connectorFoot control and TIG torch connector |
(Optional) |
 |
| 357502 |
Flowmeter with 2 gas pressure gaugesFlowmeter with 2 gas pressure gauges |
(Optional) |
 |
| 309269 |
Helmet with auto-dimming LCD filter (9-13 DIN) MAXIVISION COLOR to protect face and eyes during welding.Helmet with auto-dimming LCD filter (9-13 DIN) MAXIVISION COLOR to protect face and eyes during welding. |
(Optional) |
 |
Documents: