Produkt-Detail
Beschreibung:
Single-phase inverter power source for TIG welding with high frequency and MMA-SMAW, equipped with pulsed arc mode. Suitable for welding of iron, steel, stainless steel, copper and titanium.
It's suitable for light-medium metal fabrication as well as for servicing in general.
Equipped with graphic auto-adaptative interface display.
MAIN FEATURES
• E-PULSE function to reduce thermal alteration and simplify welding of thin coil.
• 2-stage, 4-stage and 4 stage bilevel functions.
• Possibility of welding with two preset welding current levels (bilevel).
• Possibility to set the time of PREGAS, POSTGAS, SLOPE UP and SLOPE DOWN.
• Possibility of storing up to 10 welding programs in memory which may be easily re-called.
• In MMA-SMAW mode, it allows welding with rutile and basic coated electrodes.
• Microprocessor control of welding functions.
• Possibility to be connected to motor-driven generators with an electronic regulator of the tension (not greater than 260V RMS) and of an adequate power.
• IP23 protection to allow open-air works.
• Manufactured in compliance with the IEC/EN 61000-3-12 standard by means of the PFC devices.
• Possibility to activate a security password.
• Small dimensions and light weight.
• Presetting for use of water cooled torches with the cooling unit.
• Optional trolley for transport.
OPTIONAL SPECIAL FUNCTIONS
• E-START
• E-ARC
• E-SPOT
• E-MULTIPOINT
• E-TWOPULSE
technische Daten:
|
Code
|
S00160
|
|
|
Item
|
TIG 2072 DC HF
|
|
|
Mode
|
TIG
|
MMA
|
|
|
Input Voltage
|
1x230V 50-60Hz
|
|
|
Installation power
|
4 kW
|
|
|
MIN-MAX Welding current
|
5 ÷ 200 A
|
10 ÷ 160 A
|
|
|
Duty cycle – 10 MIN CYCLE ACCORDING TO EN 60974-1
|
40% 200A - 60% 160A - 100% 130A
|
35% 160A - 60% 130A - 100% 115A
|
|
|
Electrodes
|
|
Ø mm 1,6 ÷ 4
|
|
|
Stepless regulation
|
ELECTRONIC
|
|
|
Protection class
|
IP 23
|
|
|
Construction standards
|
EN60974-1 / EN60974-10
|
|
|
Dimensions
|
220x440x460h mm
|
|
|
Weight
|
14,5 kg
|
|
Video
Special function for TIG welding: E-MULTIPOINT
Special function for TIG welding: E-SPOT
Special function for TIG welding: E-ARC
Special function for TIG welding: E-START
Zubehöre:
| 535802 |
4 m, ABITIG 26 torch4 m, ABITIG 26 torch |
(Optional) |
 |
| 535805 |
4 m, ABITIG 26 UP-DOWN torch4 m, ABITIG 26 UP-DOWN torch |
(Optional) |
 |
| 535806 |
4 m, ABITIG 18 water cooled torch4 m, ABITIG 18 water cooled torch |
(Optional) |
 |
| 535807 |
4 m, ABITIG 18 UP-DOWN water cooled torch4 m, ABITIG 18 UP-DOWN water cooled torch |
(Optional) |
 |
| 530137 |
Earth cable for weldingEarth cable for welding |
(Optional) |
 |
| S01705A.11 |
Zubehörset für das Elektrodenschweissen mit 3+2 m Kabel 25 mm2, Texas 50Zubehörset für das Elektrodenschweissen mit 3+2 m Kabel 25 mm2, Texas 50 |
(Optional) |
 |
| 560010 |
CU06H - Horizontal 5 l cooling unit for torchCU06H - Horizontal 5 l cooling unit for torch |
(Optional) |
 |
| 580002 |
Fahrwagen für TransportFahrwagen für Transport |
(Optional) |
 |
| 540102 |
INOX FAST CLEAN KITINOX FAST CLEAN KIT |
(Optional) |
 |
| 570008 |
TIG foot controlTIG foot control |
(Optional) |
 |
| 570006 |
Remote controlRemote control |
(Optional) |
 |
| 530330 |
5 m long cable for remote control5 m long cable for remote control |
(Optional) |
 |
| 363307 |
Foot control and TIG torch connectorFoot control and TIG torch connector |
(Optional) |
 |
| 357502 |
Druckminderer mit 2 ManometernDruckminderer mit 2 Manometern |
(Optional) |
 |
| 309269 |
Helmet with auto-dimming LCD filter (9-13 DIN) MAXIVISION COLOR to protect face and eyes during welding.Helmet with auto-dimming LCD filter (9-13 DIN) MAXIVISION COLOR to protect face and eyes during welding. |
(Optional) |
 |
Unterlagen: