detalle del producto
DESCONTINUADO
descripción:
Single phase INVERTER portable power source for MMA and TIG welding, with contact start. It welds coated rutiles and basic electrodes as well as electrodes for aluminium and cellulosic electrodes.
MAIN FEATURES
• Stable arc.
• Easy to use.
• It allows welding with rutile, basic, for aluminium and cellulosic electrodes
• Microprocessor control of welding functions.
• Current remote control
• Automatic shut-off in case of over-hearing and automatic re-start.
• Arc force and Hot start function.
• Anti-stick function.
• In TIG welding the arc may be started by contact (Contact Start).
• Negligible tungsten inclusion in TIG welding.
• Forced air cooling through cooling tunnel.
• Possibility to be connected to motor-driven generators with an electronic regulator of the tension (not greater than 260V RMS) and a power equal to or greater than 6 kVA.
• Equipped with strong shoulder strap.
• Possibility of using 50 m long power cables with no significant power losses.
• IP23 protection to allow open-air works.
• Small dimensions and light weight.
• Manufactured in compliance with the IEC/EN 61000-3-12 standard by means of the PFC devices.
datos técnicos:
|
Code
|
S00148
|
|
|
Item
|
MMA 1960 CELL
|
|
|
Input Voltage
|
1x230V 50-60Hz
|
|
|
Installation power
|
3,5 kW
|
|
|
MIN-MAX Welding current
|
10 ÷ 180 A
|
|
|
Duty cycle – 10 MIN CYCLE ACCORDING TO EN 60974-1
|
30% 180A - 60% 130A - 100% 115A
|
|
|
Electrodes
|
Ø 1,6 ÷ 4 mm
|
|
|
Stepless regulation
|
ELECTRONIC
|
|
|
Protection class
|
IP23
|
|
|
Insulation class
|
H
|
|
|
Construction standards
|
EN60974-1 / EN60974-10
|
|
|
Dimensions
|
135x425x280h mm
|
|
|
Weight
|
9,5 kg
|
|
accessorios:
documentos: